A618 2000-2002 Dodge Ram 2500 & 3500 8.0L RWD – Remanufactured 4-Speed Automatic Trans

Description

Prevent friction plate glazing and severe converter lockup failure through 195 PSI fluid circuit pressure and 450 lb-ft continuous torque capacity during extreme summer commercial flatbed equipment hauling operations. Operators install the Ram 3500 8.0L Remanufactured Transmission in 2000 to 2002 rear-wheel-drive trucks to eliminate clutch slip under demanding freight schedules.

A high-strength A380 die-cast aluminum casing structure counters torsional stress behind 8.0L Magnum V10 engines. Remanufactured cast-iron valve bodies feature reamed bores fitted with hard-anodized Sonnax regulator sleeves and updated electronic governor transducers. Heavy-duty carbon-metallic clutch plates disperse extreme friction heat under maximum payload demands. Exterior specifications include a 245-pound dry weight without torque converter, an 11.5-quart fluid capacity, and standard 3/8-inch inverted flare cooler thread ports.

Key Features of Ram 3500 8.0L

Fleet operators buy Ram 3500 8.0L remanufactured transmission units to restore work truck productivity across grueling highway freight routes. Every remanufactured drivetrain unit features reinforced internal components engineered to outlast original factory specifications under severe commercial truck service.

• 195 PSI regulated line pressure prevents clutch slip under high V10 torque output.
• 5-pinion steel front planetary carriers absorb intense driveline shock loads from heavy trailers.
• Hard-anodized valve bore sleeves halt hydraulic fluid cross-leaks inside the body.
• High-energy carbon friction discs dissipate operational heat to prevent plate glazing.
• Furnace-brazed heavy-duty torque converters prevent stator fin deflection under maximum gross loads.
• High-output fluid pumps maintain steady hydraulic pressure across elevated summer temperatures.
• A Ram 3500 8.0L drivetrain package incorporates upgraded electronic governor pressure solenoids.
• Reinforced direct clutch drums distribute engine torque across six internal friction discs.

Hydraulic Pressure V10 Calibration Data

Main line fluid circuits regulate between 145 and 195 PSI pump pressure to hold clutch packs firm without slippage under load. Transmission fluid sump temperatures remain within an optimal 160°F to 190°F corridor to safeguard fluid viscosity. The geartrain withstands 450 lb-ft continuous input torque at 2,400 RPM under Severe Commercial Fleet duty cycles. Auxiliary radiator cooler passages shed 32 kW of heat from internal clutch friction discs. Gear ratios measure 2.45:1 in first, 1.45:1 in second, 1.00:1 in third, and 0.69:1 in fourth overdrive.

Rear Driveline Extension Spline Hub

A precision-ground 30-spline rear output shaft mates straight with factory Dodge slip yokes on heavy rear-wheel-drive truck chassis. The internal parking pawl gear provides 1,950 lb-ft holding torque to hold loaded trucks on steep inclines. Technicians must check driveshaft universal joint play and maintain casing extension runout within 0.003-inch total indicator runout.

Electronic Shift Maintenance Guidelines

Electronic governor pressure solenoids work in tandem with PCM commands to execute positive gear shifts across varying trailer loads. Note that this heavy commercial transmission is not engineered for track drag strip racing, extreme tractor pull sled competitions, or gross vehicle weights exceeding manufacturer chassis tow ratings.

• Inspect transmission fluid level and fluid condition on the dipstick each shift.
• Drain fluid pan and install new internal pickup filters every 30,000 miles.
• Perform cooler line backflush procedures and test circuit line pressure every 12 months.

Heavy Freight Crate Manifest

Every transmission purchase comes backed by a 3-Year / 100,000-Mile commercial fleet warranty for complete operational peace of mind. Shipments arrive in a heavy wooden transport container holding the complete remanufactured transmission, a balanced lockup torque converter, new oil cooler sealing washers, an installation manual, and an ATSG dynamometer test certificate.