Torqeedo Cruise-6.0-TS 9.9HP 25in Electric Tiller Outboard Motor

Description

Featuring an ergonomic digital tiller handle, the Torqeedo Cruise-6.0-TS Outboard Motor powers shallow work skiffs without emissions. The 48-volt brushless DC drive produces continuous thrust equivalent to a 9.9-horsepower gasoline outboard. A 25-inch long shaft fits commercial skiffs and tender transoms. An onboard computer computes remaining battery range through GPS data to protect operators during commercial harbor transit shifts.

Hard-anodized marine aluminum construction protects the lower torpedo housing against galvanic saltwater damage. Ceramic bearings support the high-tensile stainless steel propeller shaft without messy grease or oil reservoirs. Direct seawater contact dissipates internal electrical heat during extended run periods. Dry weight totals 46 lbs, crankcase lube is absent, and the clamp bracket mounts securely across 25-inch transoms using dual clamp screws.

Key Features of Torqeedo Cruise-6.0-TS

Water utility teams buy Torqeedo Cruise-6.0-TS inboard engine alternatives for potable water inspection vessels. The zero-emission electric motor eliminates hydrocarbon pollution risks in sensitive municipal drinking water reserves.

• 6 kilowatt input rating generates 9.9-horsepower equivalent thrust for commercial skiff operations.
• Integrated tiller handle houses an electronic display tracking speed and battery state.
• 25-inch drive shaft positions the propeller in clean flow behind standard boat transoms.
• Direct electric drive generates 80 lb-ft continuous shaft torque starting from dead stop.
• Electric power tilt lifts the motor pod clear of shallow submerged harbor obstructions.
• Waterproof IP67 construction protects all internal electrical parts from rain and salt wash.
• Cruise-6.0-TS electric drive mechanics cut maintenance costs by removing spark ignition parts.
• Integrated magnetic emergency key halts motor rotation upon detachment from the helmsman.

Electric Drive Torque Performance

The 48-volt permanent magnet motor draws up to 6,000 watts under maximum throttle settings. Internal stator temperatures remain between 108°F and 130°F through passive conductive heat transfer into the surrounding sea water. The brushless drive yields 80 lb-ft continuous torque from zero RPM to move heavy displacement workboats without delay. Cruising throttle positions consume 1,500 watts, providing multi-hour operating endurance. High-capacity power cables route 130 amps through sealed connections without excessive line resistance or thermal accumulation across long harbor runs.

Transom Clamping Clearance Boundaries

Heavy-gauge aluminum clamp brackets secure the motor frame over 25-inch transom bulkheads using dual threaded clamp screws. The 25-inch shaft aligns the anti-cavitation plate flush with flat-bottom skiff keels. Zero exhaust gas discharge conforms to ABYC and USCG harbor emission rules. The tiller handle swings through 45-degree steering arcs without interference.

Harbor Maintenance Service Protocol

The digital tiller throttle responds with instant motor direction control between forward and reverse detents. This unit is not engineered for high-speed offshore racing hulls, dry running out of water, or commercial ice-breaking duty cycles. Strict adherence to schedule keeps electric propulsion packages running without breakdown across severe harbor conditions.

• Inspect battery cable connection blocks and clear propeller weed fouling each shift.
• Wash the exterior aluminum casing with fresh water and check clamp bolts every 100 hours.
• Inspect mechanical drive shaft seals and renew sacrificial zinc anodes every 12 months.

Commercial Warranty Crate Manifest

Commercial users obtain a 2-Year limited manufacturer warranty against defective parts. Shipped in a secured transport crate, the package contains the complete 25-inch electric tiller motor, digital tiller display unit, emergency kill switch lanyard, heavy battery connection cables, and an operator service guide.