Torqeedo Cruise-12.0-RS 25HP 15in Electric TorqLink Remote Mechanical Outboard Motor

Description

Command immediate low-speed electric thrust through Torqeedo Cruise-12.0-RS Outboard Motor systems. Generating 25-horsepower equivalent thrust from a 48-volt power supply, this short 15-inch shaft outboard powers low-transom work skiffs and tender craft. Featuring TorqLink digital network architecture, this remote-controlled electric propulsion unit delivers emission-free operation, instantaneous throttle response, and silent harbor patrol navigation across coastal waterways.

Marine-spec hard-anodized aluminum forms the streamlined motor pod to resist aggressive sea water oxidation. Ceramic bearings support the high-tensile stainless steel propeller shaft without fluid lubricants. Hydrodynamic flow across the casing dissipates electrical coil heat directly into the ambient water. Weighing 127 lbs dry, the motor eliminates oil sumps, avoids fuel storage tanks, and bolts across standard 15-inch commercial skiff transoms using heavy clamp brackets.

Key Features of Torqeedo Cruise-12.0-RS

Marine research stations buy Torqeedo Cruise-12.0-RS inboard engine alternatives to operate quiet sampling craft. The short-shaft design provides rapid acceleration without disturbing delicate aquatic plant life.

• 15-inch short shaft matches shallow draft commercial work skiffs and research craft.
• 12 kilowatt input generates 25-horsepower equivalent thrust without fuel exhaust smoke.
• TorqLink CAN-bus connection provides real-time battery data on digital helm screens.
• Direct electric propulsion outputs 145 lb-ft continuous shaft torque from zero RPM.
• Console-controlled power tilt lifts the motor pod clear of shallow sand bars.
• Mechanical steering tube accepts standard drag link rods from console steering wheels.
• Cruise-12.0-RS electric drive eliminates spark plug changes and seasonal winter fuel stabilization.
• Waterproof IP67 construction protects all internal electrical parts from rain and salt wash.

Dynamic Torque Thermal Boundaries

Consuming 12,000 watts from a 48-volt battery system, the brushless motor maintains high output without thermal throttling. Internal motor temperatures hold between 110°F and 135°F through direct water cooling across the outer aluminum pod. The direct-drive system generates 145 lb-ft continuous shaft torque from dead stop for immediate workboat propulsion. At cruising speeds, current draw drops to 65 amps for extended operational shifts. High-grade insulated cables transfer 250 amps without heat accumulation across long commercial harbor assignments.

Transom Clamp Clearance Limits

Adjustable clamp brackets secure the motor frame over 15-inch boat transoms using high-strength threaded pressure screws. The 15-inch shaft aligns the anti-ventilation plate with shallow skiff bottoms. Zero underwater exhaust noise complies with ABYC marine sound mandates. The remote steering connection arm allows 35 degrees of travel within standard splash well boundaries.

Commercial Service Operational Rules

The electronic TorqLink throttle control provides smooth forward and reverse power application without mechanical cable resistance. This motor is not engineered for high-speed offshore racing, dry running out of water, or severe rock bottom dredging. Regular preventative maintenance preserves high operational availability across commercial harbor operations.

• Inspect battery terminal connections and remove propeller weed wraps each shift.
• Wash down the exterior aluminum pod with clean water every 100 hours.
• Check drive shaft seals and install new sacrificial zinc anodes every 12 months.

Factory Warranty Manifest Details

Commercial owners receive a 2-Year limited manufacturer warranty against defective electrical and structural components. Shipped inside a heavy transport crate, the package contains the 15-inch electric motor, TorqLink digital display, remote helm throttle, battery cables, main power fuse block, and a comprehensive owner operational guide.