Paguro 14000 Generator 400V 14 kVA 14 kW (50 Hz) 3600 RPM

Description

Need dependable three-phase offshore auxiliary current? Select the Paguro 14000 Three-Phase Marine Generator. Operating at 3,000 RPM, this three-cylinder 1.028-liter diesel auxiliary engine produces 11.2 kW continuous three-phase power with 14.0 kVA peak capacity at 400 volts. Built with freshwater heat exchanger cooling and synchronous alternator technology, it sustains diving compressors, commercial desalination plants, and multi-deck air conditioning systems without phase imbalance.

A thick-wall cast iron cylinder block absorbs high internal combustion pressures during sustained offshore duty cycles. The reciprocating crank group combines a heat-treated forged alloy steel crankshaft, forged connecting rods, and oil-cooled aluminum alloy pistons. Engineering specifications include a 72 mm bore, 84 mm stroke, 22.8:1 compression ratio, 3.0-quart oil sump capacity, and dry weight of 445 lbs inside its acoustic capsule. Heavy webbing prevents case distortion.

Key Features of Paguro 14000

Commercial vessel operators buy Paguro 14000 generator packages to deliver balanced three-phase auxiliary current across offshore catamarans and fishing vessels. This 50 Hz power unit outputs balanced 400-volt alternating current to eliminate phase imbalances across heavy machinery spaces.

• 11.2 kW continuous 400-volt three-phase output supports heavy induction motor starts without voltage sag.
• Four-pole brushless alternator design uses solid-state regulation to hold line voltage variation within one percent.
• Heavy sound attenuation housing suppresses internal combustion noise down to 53 decibels at seven meters distance.
• Paguro 14000 marine generator digital control unit tracks oil pressure, coolant heat, and engine rotation speed.
• Cupronickel tube-and-shell heat exchanger shields internal cast iron block passages from direct raw seawater contact.
• Automatic protection logic triggers instant engine shutdown upon loss of water flow, low oil, or overspeed.
• Starboard service access concentrates dipsticks, fluid filters, and the sea water pump behind one panel.

Three Phase Alternator Output Verification

Turning at a governed 3,000 RPM, this four-stroke diesel delivers clean 50 Hz electrical power across marine switchboards. Continuous three-phase output yields 11.2 kW (14.0 kVA at 0.8 power factor) across 400-volt circuits. Measured fuel burn records 0.65 gallons per hour at half load and 1.20 gallons per hour at full continuous rating. Pressurized internal lubrication galleries sustain 35 to 55 PSI hot oil pressure, shielding critical crankshaft and camshaft journals from friction during non-stop offshore commercial operations.

Sound Shield Hull Clearance Boundaries

The sound shield capsule measures 810 mm long, 490 mm wide, and 580 mm high, dropping between structural inboard stringers. Four captive rubber isolators prevent mechanical vibration transmission to hull frames. A 2-inch water-cooled wet exhaust mixer drops cooled gases overboard, requiring five inches of starboard clearance for technician access.

Diesel Generator Service Maintenance Rules

Purge air from fuel injection passages using the manual primer arm before engaging the electric starter. Fill freshwater cooling loops with approved marine coolant to prevent localized hot spots. This unit is not engineered for dry land exhaust operation, raw sea water block circulation, or unventilated bilge spaces.

• Drain factory break-in lube oil and install fresh filter elements after the first 50 operating hours.
• Inspect flexible raw water pump impellers and drain fuel sediment bowls every 200 running hours.
• Clean cupronickel heat exchanger tubes and replace sacrificial zinc anode plugs every 12 months.

Marine Warranty Pack Manifest

Paguro supports this generator with a 24-Month limited commercial marine warranty. The wooden freight crate contains the complete generator unit, sound attenuation enclosure, remote digital control panel, flexible fuel line kit, factory load test printout, and technical operator service documentation binder.