Fischer Panda FPMA3004 Generator 12000x PMS, KW/kVA 10.2/12.0, 3000 RPM, Cyl. 3, 705 x 445 x 590

Description

Need dependable single-phase 3000 RPM power? Select the Fischer Panda 12000x PMS Marine Generator. Operating at 3,000 RPM, this three-cylinder 0.719-liter auxiliary diesel engine produces 10.2 kW continuous single-phase current with 12.0 kVA peak capacity. Built with total water cooling encompassing both engine and alternator, it sustains multi-zone cabin air conditioning, watermakers, and galley ranges aboard offshore cruisers.

Gray cast iron block construction deadens mechanical diesel clatter while providing high structural rigidity. The rotating reciprocating group features a drop-forged alloy steel crankshaft, forged connecting rods, and oil-cooled aluminum pistons. Engine geometry presents a 67 mm cylinder bore, 68 mm stroke, 23:1 compression ratio, 2.5-quart oil capacity, and dry net weight of 330 lbs inside its acoustic sound enclosure. Full liquid cooling encapsulates both the engine block and alternator winding.

Key Features of Fischer Panda 12000x PMS

Offshore cruisers buy Fischer Panda 12000x PMS generator packages to furnish clean single-phase auxiliary current without excess hull weight. This fixed-speed asynchronous system provides stable 230-volt energy to power extensive domestic equipment at anchor.

• 10.2 kW continuous 230-volt single-phase output maintains heavy vessel domestic hotel loads without line drop.
• Asynchronous brushless alternator design eliminates slip rings while delivering high electrical efficiency.
• Sealed sound insulation capsule drops operating sound emissions down to 54 decibels at seven meters distance.
• 12000x PMS marine generator digital control panel monitors voltage output, engine heat, and running hours.
• Complete liquid cooling circulates freshwater through both the diesel engine and alternator winding jackets.
• Automatic safety shutdown system halts operation upon high coolant temperature or loss of engine oil pressure.
• Single-side routine maintenance layout places oil dipstick and raw water impeller behind one fast-access door.

Asynchronous Alternator Load Verification

Operating at an exact 3,000 RPM governing point, this four-stroke diesel maintains stable 50 Hz current. Full electrical output yields 10.2 kW and 44.3 amps across 230-volt lines with clean sine wave form. Measured fuel burn records 0.65 gallons per hour at 50 percent load and 1.15 gallons per hour at maximum output. Internal oil galleries maintain 30 to 50 PSI hot pressure, safeguarding main bearing journals from thermal fatigue during extended cruising.

Sound Capsule Machinery Clearances

The compact sound shield measures 705 mm in length, 445 mm in width, and 590 mm in height. Heavy neoprene base mounts absorb secondary hull harmonics. Exhaust plumbing connects to a 1.5-inch water-injected exhaust elbow, while the front and starboard service panels demand five inches of clearance for lube maintenance.

Scheduled Marine Service Rules

Operate the fuel feed priming arm to evacuate air from diesel filter bowls before initial engine start. Maintain full expansion bottle coolant levels to prevent dry heat cycles. This marine unit is not engineered for raw sea water block cooling, open deck installations, or unvented gasoline holds.

• Extract factory run-in oil and renew full-flow filter elements after the initial 50 hours of operation.
• Check raw water pump impeller flexibility and clean fuel separator bowls every 200 running hours.
• Descale heat exchanger core tubes and thread in fresh zinc protection plugs every 12 months.

Pleasure Craft Warranty Manifest

Fischer Panda includes a comprehensive 24-Month limited warranty on all pleasure craft installations. The reinforced freight crate contains the complete encased generator package, remote digital start panel, isolated vibration mounts, factory run verification printout, and complete owner service manual binder.