VEGE DF14 5.0L 302ci Premium Grade Long Block Remanufactured Crate Engine

Description

Propel vintage performance passenger coupes with the VEGE DF14 Remanufactured Crate Engine premium grade 5.0L 302ci long block package. Produces 225 horsepower at 4,200 RPM and 300 lb-ft torque at 3,200 RPM through sequential electronic fuel injection. Precision line boring and computerized hone profiling restore cylinder roundness to eliminate crankcase blowby and overcome loss of compression on standard unleaded pump fuel.

Cast iron small-block casting provides structural rigidity across high-stress passenger chassis compartments. The reciprocating group pairs a nodular cast iron crankshaft with forged powder metal connecting rods and hypereutectic aluminum pistons with skirt coating. Cylinder dimensions detail a 4.00-inch bore, a 3.00-inch stroke, and a 9.0:1 compression ratio. A 5-quart stamped steel oil pan holds complete dry engine weight at 465 lbs.

Key Features of VEGE DF14

Automotive technicians and private mechanics buy VEGE DF14 crate engine packages to rebuild high-mileage passenger sedans and performance coupes. This premium remanufactured long block drops straight into original chassis engine compartments while restoring factory low-end torque and electronic fuel injection compatibility.

• 4.00-inch diamond-honed cylinder walls seat molybdenum rings to prevent oil contamination.
• Hydraulic roller camshaft profiles optimize airflow across street cruising and highway passing speeds.
• 1.78-inch intake valves maximize combustion chamber airflow for rapid throttle acceleration.
• 9.0:1 compression ratio pistons burn regular 87-octane pump gasoline with high efficiency.
• 5-quart steel oil pans maintain constant oil immersion during hard braking and cornering.
• Dual-roller timing chain sets maintain exact camshaft synchronization without chain slack across high mileage.
• Remanufactured cast iron cylinder heads feature induction hardened valve seats to prevent valve recession.
• The DF14 replacement engine package includes micro-finished crank journals to prolong main bearing life.

Combustion Profile Dynamic Power Output

Operating across an energetic power band between 1,500 and 5,500 RPM, this premium 5.0-liter V8 produces 225 brake horsepower at 4,200 RPM alongside 300 lb-ft torque at 3,200 RPM. The hydraulic roller camshaft profile features 210 degrees duration at 0.050-inch lift, drawing 18 in-Hg intake manifold vacuum at 680 RPM hot idle. Recommended fuel remains standard 87-octane pump gasoline. Internal oil pumps maintain 40 to 65 PSI oil pressure to safeguard crankshaft bearings under warm operating temperatures.

Chassis Integration Bellhousing Structural Fitment

The small-block rear bellhousing pattern bolts straight to classic automatic and manual transmissions without adapter plates. A 50-ounce external balance rotating specification aligns straight with factory flywheels and harmonic balancers. Symmetrical side motor mount bosses line up with original vehicle chassis frame perches, clearing compact car front crossmembers and steering shafts.

Operational Limits Break In Guidelines

Pre-lube the central oil gallery with 10W-30 mineral break-in oil prior to initial starter engagement. Run the engine through a standard twenty-minute thermal cycling procedure while monitoring coolant temperature. This remanufactured long block is not engineered for aftermarket turbocharger boost exceeding 6 PSI, nitrous injection, or competitive drag racing.

• Drain break-in motor oil and install fresh 10W-30 motor oil at 500 miles.
• Inspect valve cover gaskets and check cooling hose clamps every 3,000 miles.
• Change engine oil filter and inspect crankcase ventilation every 12 months.

Factory Warranty Crate Shipping Manifest

VEGE covers this premium crate unit with a 36-Month or 100,000-Mile remanufactured limited warranty for standard road use. Physical crate shipments include the complete long block with oil pan, timing cover, complete valvetrain, oil pump, and an individual factory inspection test record.