VEGE DDE4 2.0L 122ci Compact Car Long Block Remanufactured Crate Engine

Description

Harness dependable commuter vehicle propulsion through the VEGE DDE4 Remanufactured Crate Engine 2.0L 122ci long block unit. Generates 158 horsepower at 6,400 RPM and 148 lb-ft torque at 4,200 RPM utilizing dual overhead cams. Computerized cylinder bore honing and micro-finished journal surfaces restore factory tolerances to overcome compression loss and poor fuel economy on standard grade fuel.

An open-deck die-cast aluminum block houses centrifugally cast iron cylinder liners that disperse combustion heat into cooling passages. The reciprocating group contains an induction-hardened forged steel crankshaft, forged connecting rods, and lightweight cast aluminum pistons. Bore size measures 3.23 inches while stroke measures 3.39 inches with a 10.2:1 compression ratio. An aluminum lower crankcase oil pan brings complete dry weight to 285 lbs.

Key Features of VEGE DDE4

Automotive service centers buy VEGE DDE4 crate engine models to resolve catastrophic engine failures in popular front-wheel-drive sedans. This remanufactured long block brings factory fuel economy back to commuter platforms without expensive dealership crate costs.

• 3.23-inch cylinder sleeves undergo diamond honing to seat low-drag piston rings for optimal seal.
• 16-valve dual overhead camshafts provide efficient airflow across city and highway driving modes.
• 1.30-inch intake valves direct fuel-air charges into combustion chambers for crisp response.
• 10.2:1 compression pistons extract maximum thermodynamic energy from inexpensive 87-octane unleaded pump gasoline.
• Lower structural aluminum crankcase pans reduce oil temperature and damp engine noise.
• Precision timing chains keep camshaft phasing locked without elongation across high operating mileage.
• Resurfaced aluminum cylinder heads receive precision ground multi-angle valve seats to preserve compression.
• The DDE4 replacement engine package includes new rod bearings with factory specified clearance tolerances.

Combustion Profile Dynamic Power Output

Operating efficiently between 2,000 and 6,500 RPM, this inline-four produces 158 brake horsepower at 6,400 RPM alongside 148 lb-ft torque at 4,200 RPM. Camshaft profiles offer 200 degrees duration at 0.050-inch lift, pulling 18.5 in-Hg manifold vacuum at an 720 RPM warm idle. Optimized for 87-octane pump gas, this configuration preserves fuel economy. Internal gerotor oil pumps produce between 38 and 58 PSI operational pressure under hot highway cruise conditions across all ambient seasons.

Chassis Integration Bellhousing Structural Fitment

Engine block machining matches front-wheel-drive transaxle bellhousings without adapter brackets. An internal balance design accommodates stock automatic flexplates or manual flywheels. Structural side bosses accept original engine mount isolators, dropping straight into tight compact car front subframes with full clearance for half-shaft axles and lower radiator hoses.

Operational Limits Break In Guidelines

Fill the crankcase with SAE 5W-20 mineral break-in oil and pre-lube the oil passages before initial cranking. Purge coolant air pockets through the upper thermostat housing bleed valve. This remanufactured long block is not engineered for aftermarket turbocharger installations exceeding 5 PSI boost, nitrous kits, or competitive track racing.

• Drain break-in motor oil and change oil filter media after 500 miles.
• Check accessory drive tension and coolant expansion tank levels every 3,000 miles.
• Replace engine oil and conduct intake manifold vacuum checks every 12 months.

Factory Warranty Crate Shipping Manifest

VEGE includes a 36-Month or 100,000-Mile limited warranty covering remanufactured craftsmanship for regular passenger road applications. Crated shipments contain the complete long block with oil pan, front timing cover, camshafts, lifters, valves, internal oil pump, and an individual quality inspection sign-off document.