Torqeedo Cruise-12.0-RXL 25HP 25in Electric TorqLink Remote Mechanical Outboard Motor

Description

Cut fleet energy consumption expenses using Torqeedo Cruise-12.0-RXL Outboard Motor propulsion packages. Drawing 48-volt battery power, this unit produces 25-horsepower equivalent thrust through an extra-long 25-inch shaft. Built for commercial work pontoons, aquaculture barges, and passenger launches, it features TorqLink remote controls for precise maneuvering without fuel odors, exhaust smoke, or spark ignition maintenance.

Hard-anodized marine aluminum alloy shields the submerged propulsion pod from harsh sea water pitting. Precision stainless steel shafts rotate on ceramic bearings without oil lubrication sumps. Direct conduction through the outer aluminum casing transfers internal heat into the surrounding water flow. The motor scales at 134 lbs dry, eliminates fuel oil filters, and fastens across standard 25-inch commercial transoms with high-strength four-bolt marine mounting brackets.

Key Features of Torqeedo Cruise-12.0-RXL

Aquaculture operators buy Torqeedo Cruise-12.0-RXL inboard engine packages to service floating fish pens without fuel exhaust contamination. The 25-inch drive leg keeps the propeller submerged during choppy sea conditions.

• 25-inch extra-long shaft layout prevents propeller ventilation in rough coastal chop.
• 12 kilowatt input produces 25-horsepower equivalent thrust for continuous barge towing operations.
• TorqLink CAN-bus communication links remote helm controls to smart battery banks.
• Direct electric propulsion outputs 145 lb-ft continuous shaft torque from zero RPM.
• Console-activated power tilt lifts the motor pod out of the water for slip mooring.
• Mechanical steering tube integrates with commercial push-pull cable helm systems.
• Cruise-12.0-RXL commercial package removes messy crankcase oil changes and seasonal winterizing steps.
• Submersible IP67 casing keeps all electrical components protected from extreme wave wash.

TorqLink Electrical Performance Limits

Drawing 12,000 watts of electrical power at 48 volts, the drive maintains steady continuous output under maximum throttle. Internal motor core heat remains between 110°F and 135°F through direct sea water casing conduction. The system outputs 145 lb-ft continuous shaft torque from zero RPM to move displacement hulls without hesitating. Cruising throttle positions consume 3,000 watts, maintaining long transit shifts. Heavy-gauge insulated power cables route 250 amps through sealed terminals without thermal resistance build-up across continuous work shifts.

Transom Installation Spatial Boundaries

Heavy-duty four-bolt clamp brackets mount the motor across 25-inch commercial boat transoms. The 25-inch shaft positions the anti-cavitation plate flush with deep hull bottoms. Completely silent underwater running conforms to ABYC and USCG environmental noise mandates. The mechanical steering hook allows 35 degrees of travel without binding control cables.

Commercial Maintenance Inspection Protocols

The electronic TorqLink remote lever provides instantaneous motor throttle response across forward and reverse directions. This motor is not engineered for hydroplane circuit racing, unvented enclosed dry tanks, or heavy gravel dredging without bottom clearance. Adherence to basic inspection intervals keeps the electric powertrain operating without failure in demanding salt environments.

• Inspect high-current power cables and clear propeller line wraps each shift.
• Check TorqLink CAN-bus communication harnesses and clean casing every 100 hours.
• Inspect lower pod mechanical seals and install fresh zinc anodes every 12 months.

Factory Warranty Crate Details

A 2-Year limited manufacturer commercial warranty provides comprehensive coverage against electrical and structural failures. Shipped inside an industrial wooden crate, the package includes the 25-inch electric outboard motor, TorqLink digital display, remote helm throttle, battery connection cabling, terminal fuse block, and comprehensive shop manual.