RE5R05A 2013-2015 Nissan Armada, 2013-2014 Titan 5.6L RWD – Remanufactured 5-Speed Automatic Trans

Description

Halt forward clutch slippage and internal hydraulic line pressure drop under 285 PSI continuous pump force across severe multi-stop regional commercial cargo transport corridors with the Nissan RE5R05A Remanufactured Transmission engineered for 2013 to 2015 Armada and 2013 to 2014 Titan rear wheel drive utility platforms powered by the 5.6-liter V8 engine.

Die-cast A380 aluminum casing structures provide exceptional rigidity against severe driveline twist during continuous hauling operations. Hard-anodized Sonnax valve bore sleeves eliminate cross-circuit hydraulic fluid bypass across the lower valve body casting. Sintered bronze reaction plates work in tandem with high-energy carbon friction discs to hold high clamp loads. Dry unit weight measures 216 lbs without fluid. Total transmission fluid sump capacity measures 11.2 quarts of genuine Nissan Matic-S fluid routed through threaded 3/8-inch inverted flare cooler ports.

Key Features of Nissan RE5R05A

Fleet operators choose to buy Nissan RE5R05A remanufactured transmission packages to eliminate chronic cross-contamination leaks common to aged factory truck units. Precision machining restores hydraulic circuit integrity to handle severe vocational duty cycles across suburban routes.

• Upgraded 280 PSI line pressure regulator valves stop friction shudder during kickdown transitions.
• Precision balanced five-pinion front planetary carriers distribute torque without gear lash chatter.
• Hard-anodized valve bore sleeves prevent circuit leaks under sustained highway fluid temperatures.
• Remanufactured torque converter friction plates hold clamp force under heavy trailer hauling loads.
• Hydro-pulse tested solenoids respond within 45 milliseconds to vehicle TCM shift parameters.
• High-capacity carbon-metallic friction packs replace standard paper linings for extended wear life.
• Seven-clutch direct drum units increase continuous torque capacity across aggressive passing maneuvers.
• Dyno-tested Nissan RE5R05A valve bodies maintain line pressure without internal fluid bypass.

Dynamic Hydraulic Pressure Step Calibration

Calibrated main line hydraulic pressures maintain 220 to 285 PSI pump force to seat clutch packs without hesitation under heavy acceleration. The 5-speed gear train exhibits mechanical ratios of 3.84:1 in first, 2.35:1 in second, 1.53:1 in third, 1.00:1 in fourth, and 0.84:1 in fifth gear overdrive. Continuous duty designation supports severe commercial fleet towing up to 8,500 lbs gross trailer weight. Auxiliary multi-plate cooling circuits dissipate 430 BTU per minute of heat energy to maintain fluid sump temperatures between 165°F and 188°F.

Output Shaft Spline Mechanical Tolerances

A 28-spline induction-hardened output shaft seats into the rear driveshaft slip yoke with less than 0.002-inch dial indicator runout. Internal ductile iron parking pawl mechanisms hold 1,950 lb-ft holding torque against downhill rollaway events. Precision center bearing alignment isolates driveline resonance before rotational vibration reaches chassis crossmembers. Tailhousing oil seals resist highway grime contamination.

Shift Adaptation Service Guidelines

Technicians must flash vehicle transmission control modules with updated factory software before initial engine start. Clear adaptation tables to allow pulse-width modulated solenoids to relearn shift timing. This unit is not engineered for closed-course drag strip racing, extreme rock crawling, or gross combined vehicle weights exceeding factory chassis tow limits.

• Inspect fluid pan magnetic collection pads for metal particle accumulation every 30,000 miles.
• Evacuate fluid and replace pan gaskets to maintain hydraulic integrity every 12 months.
• Examine cooler line seals for thermal leakage during vehicle inspections each shift.

Commercial Crate Manifest Warranty Coverage

Protected by a comprehensive 3-Year / 100,000-Mile commercial fleet warranty covering certified parts and labor. Each heavy wooden shipping crate contains one complete remanufactured transmission unit, precision balanced torque converter, pre-flushed fluid cooler line washers, vehicle setup installation guide, and verified dynamometer pressure test sheet.